Wifi Controller macht die psp als gamepad für den PC nutzbar. Dabei werden über die WLAN Funktion Daten ausgetauscht.
Änderungen:
* Cleaned up and added more detailed instructions
* Fixed up on-screen display some
* Added some more detailed battery information
* Cleaned up the connection code some
* Moved some text strings to a new file
* Cleaned up code overall
Howto (nur mal auf englisch)
WiFi Controller v0.3 uses the first infrastructure connection in your network connection list. David said he wrote the program for v1.00 and v1.50 but unconfirmed reports have it that it works for v2.60. But that’s unconfirmed.
Installation:
“These steps are all necessary and you should pay close attention to them,” says David.
1. Open the PSP directory and edit the proper wifi.cfg for your PSP version and set the IP of the computer you are going to use this on. If you don’t know your IP address. Go to your “Start” menu. Click on “Run…” When the box opens up type “cmd.exe” without the quotes. When the command prompt opens type “ipconfig” without the quotes. It will report your IP address.
2. Copy the correct director(y|ies) to your PSP depending on whether you have a v1.00 or v1.50 PSP. If you use a custom firmware mod that allows the use of a single EBOOT.PBP files on a v1.50 PSP then you can use the v1.00 directory.
3. Download and install PPJoy.
4. After it is installed open up your “Control Panel” and click on “Parallel Port Joysticks”.
5. When the window comes up click “Add…” at the bottom. On the next screen change “Parallel port” to “Virtual joysticks”and then click “Add.”
6. It will want to install some drivers so either have it scan automatically or point it to the directory you installed PPJoy to.
7. After it is done installing, click the “PPJoy Virtual joystick 1″ in the menu and click “Mapping…”
8. Choose “Set a custom mapping for this controller” and click “Next.”
9. Set these options for best results.
Axes = 2 (X Axis and Y Axis)
Buttons = 9
POV hats = 1
10. X Axis = Analog 0
Y Axis = Analog 1
11. These buttons are up to you to set. You should leave “Button 1″ set to “nothing” otherwise you may have problems using the Triangle button on your PSP later.
Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10
12. Directional button POV
North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8
13. Run the SocketText.exe program. It will open a Command Prompt window. Just minimize it. You need to have SocketText.exe running at all times in order to use the PSP as a joystick. When you are done using it you can safely exit the program. If the window opens and closes then something went wrong beyond my control. All I can say is retry all the steps. Read PPJoy’s website as well for help in getting that setup because that is most likely where the problem lies.
14. Now start the program on your PSP and it should connect to your computer and basically be working. You’ll find out in the next step.
15. Go back to your Control Panel and go to Game Controllers. Click on “PPJoy Virtual joystick 1″ and choose Properties. On the screen that comes up you should be able to press buttons on the PSP and have them show as working on the screen. I recommend calibrating the Analog Stick too.
16. Enjoy!
Download: wificontroller_v03.zip
[Update]
Download: wificontroller_v04.zip
